Addressable EXIT GuideLed CG-S
|
|
| |
|
new!
|
|
|
|
Addressable Exit Sign Luminaire in LED Technology / EATON CEAG |
Showing The Way
The new GuideLed LED luminaire family is a prime example of how the adherence to standards, diverse possibilities for mounting and high level of economy is not all contrary to outstanding design. With GuideLed, an escape sign luminaire was developed that completely fulfills the stipulations of ISO 3864-1 and DIN 4844-1, including the requirement for 500 cd/m2 within the white surface.
The basis for these values is the highly developed Lightguide technology that transforms the high point-sourced luminance of an LED into an illuminated surface with absolutely homogeneous brightness. The 3-chip LEDs used in this process ensure with their redundancy a high level of operational safety, and with a service life of 50,000 hours significantly reduce maintenance costs. And all of this with a power consumption that is up to 70 % below a comparable luminaire with fluorescent lamp. The wide-ranging product portfolio makes GuideLed a real allrounder: escape sign luminaires with viewind distances of 20m or 30m, as single-sided or double-sided versions and with a total of six different mounting types make them the optimal solution for all room situations. All GuideLed escape sign luminaires impress with clear functionality, an especially flat construction design and without visible screw connections. Despite a compact construction and low connected loads, the new LED GuideLed safety luminaires definetely prove a match for the more watt-intensive fluorescent lamp luminaires when it comes to achievable spacing distances for standardised illumination in accordance with EN 1838. Two optics especially developed for emergency requirements guide the light either longitudinally along the escape route or else homogeneously over a very large area.
• Escape sign luminaire in LED technology for wall mounting.
• Slender design with mounting heights of 14 mm or 36 mm only.
• Very good perceptibility on account of high luminance of the white contrasting colour
> 500 cd/m² in keeping with standard ISO 3864-1 and high uniformity Lmin/Lmax > 0,8
• Increased safety by use of three-chip LEDs.
• Reduced battery costs on account of especially low power consumption.
• Low operating costs on account of low effective power of 1.9 W only.
• Minimum service requirement due to high service life of the LEDs (50 000 hours).
• Installation of the LED pictogram without tools on the mounting set.
• Automatic function test monitoring of up to 20 luminaires per circuit
• Reduced installation expenditures by STAR technology
• Freely programmable mixed operation of the switching modes per luminaire in one circuit
• LED self contained luminaire with automatic test for reduced inspection effort
• Dimmable in three steps (100%, 30%, 10%) with mains operation for use in dark ambient conditions
• Environmentally-friendly due to moden lithium ion technology
• Low operating costs via low connected load
• 1 minute switch-back delay after mains return (according to DIN VDE 0100-718)
â–º Viewing distance: 20m or 30m
â–º Housing material: PC, PMMA
â–º Light source: LED batten with 3-chip LEDs
â–º Battery: Li-On lithium 3.7V 2000mAh (in case of self-contained)
|
 Download Product Specification
|
| |
|
|
|
|
| INQUIRY |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
| |
 previous product
- next product 
|
| |
|
| |
EMERGENCY LIGHTING
Central Battery Systems
Central Safety Luminaires EXIT
Self Contained Luminaires CGLine
Emergency lighting fittings
Electronic Ballasts & Modules
Portable Torches
EN European Standards
EMERGENCY LIGHTING PROJECTS
FIRE DETECTION
Addressable Fire Detection Panels
Conventional Fire Alarm Systems
Smoke, Heat, Gas Detectors
Fire Alarm Call Points
Fire Indication & Warning Devices
|
